Earthway 2170T Commercial Tow Broadcast Spreader User Manual download pdf

(Qty 4 #36214)

1/4-20 X 1½”

Phillips Panhead

(Qty 4 #36300)

1/4-20 SS Locknut

36210

Qty 2

36214

Qty 4

31100

Qty 7

31114

Qty 3

32103

Qty 11

31106

Qty 3

32100

Qty 2

33117

Qty 1

36105

Qty 1

33108

Qty 1

33109

Qty 1

36300

Qty 6

12152

Qty 2

12148

Qty 2

1. Remove and identify all loose parts from carton.

2. Position hopper on side. Install frame using (4) 1/4-20 x 1½” Pan Head Phillips

machine screws and (4) 1/4-20 nylon insert locknuts. First put bolts through holes in

frame then through the holes in bottom of hopper. Secure with locknuts. TIGHTEN

THESE LOCKNUTS NOW

DO NOT TIGHTEN WITH POWER TOOLS.

1-2012 Pt# 52165 PAGE 1

2170T CommerCial Tow

BroadCasT spreader

ASSEMBLY and OPERATING INSTRUCTIONS

EV-N-SPRED

EarthWay

PLEASE CALL IF YOU ARE MISSING ANY PARTS, HAVE ANY DIFFICULTY IN ASSEMBLY, OR HAVE ANY QUESTIONS

REGARDING THE SAFE OPERATION OF THIS SPREADER. THIS MODEL INCLUDES LIFETIME TECHNICAL SUPPORT

SUPPORT HOT LINE: 574-848-7491 or 800-294-0671, EMAIL: TECHSUPPORT@EARTHWAY.COM

HELPFUL HINTS: READ THE DIRECTIONS BEFORE ASSEMBLY

; If your spreader does not spread evenly, be sure the word “FRONT” on the gear box points toward the tow bar of the

spreader. The impeller must turn clockwise. Reversing the gearbox will cause the impeller to turn counter clockwise.

Clean the impeller surface after each use. Fertilizer stuck on the impeller blades will cause uneven spreading.

; Your spreader is designed to be pulled at three miles per hour, which is a brisk walking speed. Slower or faster speeds will

change the spread patterns. Wet fertilizer will also change the spread pattern and ow rate. Clean and dry your spreader

thoroughly after each use. Coat all metal surfaces (inside & outside of chassis) with light oil or silicon spray to help

prevent corrosion. Wash between the shut-off plate and bottom of the hopper.

; Gears are permanently lubricated at the factory. Do not open the gearbox or dirt may enter.

OVER

3 MPH

Do not tow

faster than

3 MPH

ROCK SALT and POWDERED MATERIALS

should not be used in this spreader as it will damage

the gearbox and can void the warranty.

Use only granular materials.

IF YOUR SPREADER COMES SEMI ASSEMBLED, SKIP TO STEP #7

1 2 3 4 5 6

Summary of Contents

Page 1 - EarthWay

(Qty 4 #36214)1/4-20 X 1½”Phillips Panhead(Qty 4 #36300)1/4-20 SS Locknut36210 Qty 236214 Qty 431100 Qty 731114Qty 332103 Qty 1131106 Qty 332100 Qty 2

Page 2 - Axle Assembly

FRONTGearbox & Axle AssemblyDrive wheel sideCoast wheel sideFrame brace1/4-20 x 1½”Hex Head BoltStep 6B & 6C1/4-20 x 2¼”Hex Head BoltStep 6A1/

Page 3 - Hitch Extension

NOW GO BACK AND TIGHTEN ALL NUTS AND BOLTS STARTING WITH FIRST STEP. DO NOT OVER TIGHTEN.SLIDEGearbox &Axle AssemblyLower HandleFrame BraceCross

Page 4 - 1/4-20 Lock Nut

GAUGE & LEVERASSEMBLYControl RodTabbed HoleControl RodLever Tensioning NutGauge Setting Overlay14. Install (1) 1/4-20 regular nut (not a locknut)

Page 5 - Full Rate Path

PAGE 5The settings furnished on the Rate Setting Matrix are intended as a guide only. Variations in physical characteristics of material applied, tow

Page 6 - Deflector Kit

2170T Broadcast Tow Spreader ~ Parts ListKey # Part # Description Key # Part # Description1 70138 13” PNEUMATIC WHEEL STUD 21 60298 GAUGE & LEVER

Comments to this Manuals

No comments

Earthway 2170T Commercial Tow Broadcast Spreader User Manual

Browse online or download User Manual for Gardening equipment Earthway 2170T Commercial Tow Broadcast Spreader. Earthway 2170T Commercial Tow Broadcast Spreader User Manual [en] [de] [es] [fr] [it]

Summary of Contents

Comments to this Manuals

Related products and manuals for Gardening equipment Earthway 2170T Commercial Tow Broadcast Spreader